Here are the specifications of the Commercial plywood from HG Plywood factory:
Size: |
1220x2440 mm (4x8 ft), 914x1828mm (3x6 ft) |
Thickness: |
2mm up to 25mm |
Thickness tolerances: |
± 0.5mm |
Grade: |
A/A, A/B |
Face/Back: |
Okume, Bintagor |
Core: |
Mixhardwood (rubber, acacia, eucalyptus) |
Glue: |
MR, E2 |
Humidity: |
12-18% |
Density: |
≥ 650kg/m3 |
Hot press: |
Two time |
Cold press: |
One time |
Usage: |
To package a variety of products, including pallets, crates, seat cushions, lofts, shelves, etc., but it is especially popular for packaging valuable items, fresh fruit, and fragile goods |
Standard: |
Export HG Commercial |
Country of origin: |
Vietnam |
Min.Order Quantity: |
1*40HC container |
Packing standard: |
20ft Container : 21m³ (16 pallets)/40ft Container: 49 m³ (18 pallets) |
Payment terms: |
T/T or L/C |
Port of loading: |
Haiphong – Vietnam |
Delivery Detail: |
We always strive to deliver as quickly as possible, however, the specific delivery time may vary depending on the exact location of the customer |
Below are some images of Commercial plywood from HG Plywood. If possible, we invite you to visit our factory directly for a better assessment and experience.
The plywood production process has 3 main stages, which are:
Stage 1: Wood harvesting
Selecting appropriate trees (conifers or broadleaf)
After cutting off the branches and leaves with a cutter, take the wood and deliver it to the processing facility.
Stage 2: Wood treatment
For a specific period of time, the wooden body is immersed in water. Because of this, the machine is simple to peel and cut into a variety of sizes.
Stage 3: Plywood production
Step 1: Peel and cut the wood into pieces according to the required size.
Step 2: Create a thin wooden board using the leaf cutter.
Step 3: Cut thin wood panels to the appropriate dimensions and classifications.
Step 4: To reach the desired moisture content, thin wood panels are placed in the dryer.
Step 5: Scan the wood panel for defects using technology, then make the necessary corrections.
Step 6: After thoroughly cleaning and covering both sides of the adhesive board, stack the boards on top of one another to achieve the desired thickness.
Step 7: The board is cold-pressed to flatten it and make sure the glue is evenly distributed.
Step 8: Heat and press the board for the specified time to tightly bond the thin wood panels together.
Step 9: After hot pressing, the plywood is cooled and put into the trimming and sanding machine to remove the edge and smooth the surface.
Step 10: Check the quality of the finished product.